Search Visibility Audit

Current

This is the complete package for 3 VISE SUPPORT, 6mm-10mm and 12mm, with 16mm holes & 50mm spacing , with a top plate of 250mmx250mm, DXF files and PDF plans All supports are 150mm high.  Don't use CNC plasma table DXF FILES ARE SAVED IN AUTOCAD 2000 VERSION (R15) Recommandations: 2-WE CANNOT GARANTEE A GOOD FIT BETWEEN THE LASER CUT PLATES AND ANY OTHER PINS AND/OR ACCESSORIES 3- HOLES SIZE MAY VARY BY SUPPLIER AND MATERIAL, HOLES COULD BE TOO TIGHT OR TOO LOOSE, YOU MUST VALIDATE WITH PRE-TESTING 4-WE CANNOT GARANTEE THE FLATNESS OF THE TABLE, SINCE YOU ARE PERFORMING THE ASSEMBLY OF THE TABLE AND ACCESSORIES 5-NO REFUNDS WILL BE GIVEN OR ANY FINANCIAL COMPENSATIONS IF YOU'RE NOT SATISFIED WITH THE END PRODUCT, IT IS YOUR RESPONSABILITY TO DO THE PRE-TESTING AND TO DO THE PROPER ASSEMBLY OF THE TABLE AND ACCESSORIES 6-THE DESIGNER AND SUPPLIER OF THESE PLANS CANNOT BE RESPONSABLE FOR ANY ERRORS, MISS MATCHES OR DISSATISFACTION OF THE END RESULT/PRODUCT 7-BEFORE ORDERING, DOUBLE CHECK ALL PLATE'S QUANTITY, QUANTITY FROM BILLS OF MATERIAL COULD BE WRONG. 8-ANY 16mm PINS AND/OR ACCESSORIES WON'T FIT IN A 5/8'' TABLE / ACCESORIES, EVEN FROM OTHER SUPPLIERS 9-ANY 5/8'' PINS AND/OR ACCESSORIES WILL BE LOOSE IN A 16MM TABLE / ACCESORIES, EVEN FROM OTHER SUPPLIERS 10-DON'T MIX METRIC PINS / PLATES / TABLES / ACCESSORIES WITH IMPERIAL PINS / PLATES / TABLES / ACCESSORIES AND VICE VERSA. 11- GRIND OFF ALL EDGES FROM THE LASER CUT PLATES, DON'T LEAVE ANY BURR, OTHERWISE IT WILL IMPACT THE TABLE'S FLATNESS 12-CLAMP ALL INTERSECTIONS AND SIDE PLATES BEFORE WELDING 13-USE FEELER GAUGE BETWEEN THE RIBS AND THE TOP PLATE, TO VALIDATE THAT THERE IS NO GAPS 14-USE ALL THREADS TO CLAMP SIDE WAYS THE SIDE PLATES TOGETHER WITH THE TABLE 15- DON'T FULLY WELD THE TABLES / ACCESSORIES, PERFORM A 1'' (25mm) STITCH WELD ON ALL INTERSECTIONS AND IN BETWEEN THEM. 16-THESE PLANS ARE NOT FOR COMMERCIAL USE, ONLY FOR PERSONAL USE. 17-YOU CANNOT SALE AND/OR REPRODUCE THESE PLANS FOR YOUR OWN PERSONAL OR COMMERCIAL BENEFIT 18-YOU CANNOT SHARE THESE PLANS FOR FREE 19-ALL DXF FILES COME WITH THEIR DRAWING TEMPLATE, DIMENSIONS, NAME, SIDE VIEW ETC. SOME LASER CUTTING SUPPLIERS NEED THAT INFO FOR THEIR PROCESS AND WILL REMOVE IT FOR YOU, OTHERS DON'T WANT IT. IT'S YOUR RESPONSABILITY TO ''CLEAN'' THE DXF FILES TO YOUR SUPPLIER SPECIFICATION.