Search Visibility Audit

Current

The S-Series Saw Attachment  - S540 model suitable for  Rear Mounted Hedger. The Cloveragri S-Series saw easily cuts though branches up to 100 mm thick. The saw is smooth running with a very clean cut pattern, making it excellent for pruning shrubs and trees. Important note: Always cut thick branches from the top down to prevent the blades from jamming. It has 5 saw blades (72 teeth each) and a diameter of 400 mm. The saw has an effective working width of approx. 1500 mm. The S-Series saw blades are driven hydraulically. V-belts distribute power to ensure smooth saw blade operation. This is ONLY the saw head attachment (incl. hydraulic motor and hydraulic hoses). Required hydraulic connectors on the carrier vehicle: min. 1x double acting. Depending on the circumstances and requirements, we recommend an operational speed of approximately 2 to 7 km/h. S540 Technical specifications: Saw blades: qty. 5 Saw blade diameter: Ø 400 mm Saw drive: hydraulic Hydraulic flow rate: min. 70 - 80 L/min. Operating pressure: 160 bar Required hydraulic connection: 1x double acting. Saw blade drive: V-belt Saw blade thickness: 3 mm Saw teeth: 72 teeth per saw blade Effective cutting width: 1500 mm Branch diameter (max.): 100 mm Operating speed: 2 - 7 km/h Weight: approx. 95 kg Notes: The device is delivered well packed in a steel crate. The assembly is relatively simple and does not require specialist knowledge. In the event that you require any assistance, please contact Cloveragri.